PhD: Chemical Engineering, University of Alberta
MSc: Chemcial Engineering, Tsinghua University
BSc: Chemical Engineering, Tsinghua University
PEO, PEng
hshang@laurentian.ca
Moreau, K., Laamanen, C.A., Bose, R., Shang, H. and Scott, J.A. (2021) Environmental impact improvements due to introducing automation into underground copper mines. International Journal of Mining Science and Technology. 31:6 1159-1167
Jiao, Y., Shang, H. and Scott, J.A. (2021) A UVC based advanced photooxidation reactor design for remote households and communities not connected to a municipal drinking water system. Journal of Environmental Chemical Engineering. 9:3, 105162
Moreau, K., Laamanen, C.A., Bose, R., Shang, H., and Scott, J.A. (2020) Life cycle assessment to demonstrate how automation improves the sustainability performance of an underground mining operation. Journal of Sustainable Mining.19, 182-194.
Jiao, Y., Basiliko, N., Kovala, A.T., Shepherd, J., Shang, H. and Scott, J.A. (2020) TiO2 Based Nanopowder Coatings over Stainless Steel Plates for UV-C Photocatalytic Degradation of Methylene Blue. Canandian Journal of Chemical Engineering. 98, 728-739.
Moreau, K., Bose, R., Shang, H., and Scott, J.A. (2019) Technology to increase productivity and reduce energy consumption for underground mining operations. CIM Journal. 10:3, 115-124.
He, J., Zhang, J. and Shang, H. (2019), Two-Phase Dynamic Modelling and Simulation of Transport and Reaction in Catalytic Sulfur Dioxide Converters, Industrial & Engineering Chemistry Research. (in press).
Alenany, A., Westwick, D. T., and Shang, H. (2019), A modified observer/Kalman fillter identification (OKID) algorithm employing output residuals, International Journal of Dynamics and Control, 7, 636–643.
He, J., Zhang, J. and Shang, H. (2019), Dynamic Modelling and Simulation of the Sulphur Dioxide Converter in an Industrial Smelter, Canadian Journal of Chemical Engineering, 97, 1838-1847.
Jiao, Y., Kovala, A.T., Shang, H. and Scott, J.A. (2019) A corrugated plate photocatalytic reactor for degradation of waterborne organic contaminants. Canandian Journal of Chemical Engineering. 97, 1760-1770
Seyed Hosseini, N., Shang,H. and Scott, J.A. (2018) Biosequestration of industrial off-gas CO2 for enhanced lipid productivity in open microalgae cultivation systems. Renewable & Sustainable Energy Reviews (in press)
Seyed Hosseini, N., Shang,H. and Scott, J.A. (2018) Optimization Increasing microalgal lipid productivity for conversion into biodiesel by using a non-energy consuming light guide. Biochemical Engineering Journal. 134, 60-68
Seyed Hosseini, N., Shang,H. and Scott, J.A. (2017) Optimization of microalgae-sourced lipids production for biodiesel in a top-lit gas-lift bioreactor using response surface methodology. Energy. 146, 47-56
Seyed Hosseini, N., Shang, H., Ross, G.M. and Scott, J.A. (2016) Comparative analysis of top-lit bubble column and gas-lift bioreactors for microalgae-sourced biodiesel production. Energy Conversion and Management. 130, 230-239
Wang, Z., Wiebe, S. and Shang, H. (2016), Fault detection and diagnosis of an industrial copper electrowinning process, Canadian Journal of Chemical Engineering, 94, 415-423.
Wang, Z. and Shang, H. (2015), Kalman filter based fault detection for two dimensional systems, Journal of Process Control, 28, 83-94.
Wang, Z. and Shang, H. (2015), Observer based fault detection for two dimensional systems described by Roesser models, Multidimensional Systems and Signal Processing, Volume 26, Issue 3 (2015), Page 753-775.
Seyed Hosseini, N., Shang, H., Ross, G.M. and Scott, J.A. (2015) Microalgae cultivation in a novel top-lit gas-lift open bioreactor. Bioresource Technology 192:432-440.
Lamaanen, C., Shang. H., Ross, G.M. and Scott, J.A. (2014) A model for utilizing industrial off-gas to support microalgae cultivation for biodiesel in cold climates. Energy Conversion and Management, 88, 476-483.
Dillabough, M., Shang, H. and McLellan, P. J. (2014), Boundary control of distributed parameter systems using a discrete state space approach, Canadian Journal of Chemical Engineering, 92, 1360-1366.
Ko, Y. D. and Shang, H. (2013), A modeling toolbox and its applications to statistical process modeling, Journal of Software, 8(11), 2706-2710.
Alenany, A., Shang, H. (2013), Recursive subspace identification with prior information using the constrained least squares approach, Computers & Chemical Engineering, 54, 174-180.
Wang, Z., Zhao, J. and Shang, H. (2012), A hybrid fault diagnosis strategy for chemical process startups, Journal of Process Control, 22 (2012) 1287- 1297.
Shang, H., Scott, J.A. and Araujo, A.C.B., (2012), Modelling and control of industrial off-gag systems, In Plant-Wide Control: Recent Developments and Applications. Edited by Rangaiah, G.P. and Kariwala, V., John Wiley & Sons, pp 479. ISBN 9780470980149.
Alenany, A., Shang, H., Soliman, M. and Ziedan I. (2011), Improved subspace identification with prior information using constrained least squares, IET Control Theory & Applications, 5 (13), 1568-1576.
Ko, Y. D. and Shang, H. (2011), A neural network-based soft sensor for particle size distribution using images analysis, Powder Technology, 212, 359-366.
Ramos, J.R., Alenany, A., Shang, H. and Santos, P.J.L. (2011), Subspace algorithms for identifying separable in denominator 2-D systems with deterministic inputs, IET Control Theory & Applications, 5 (15), 1748-1765.
Ko, Y. D. and Shang, H. (2011), SAG mill system diagnosis using multivariate process variable analysis, Canadian Journal of Chemical Engineering, 89, 1492-1501.
Shang, H., Nelson, P., Salt, B., Scott, J.A. (2011) A dynamic model for smelter off-gas cleaning systems. CIM Journal, 2:3, 155-161.
Araujo, A.C.B., Brito, R.P. and Shang, H., (2011), Optimal operation of an industrial PVC dryer, Drying Technology, 29, 19-34.
Hall, A., Scott, J. A. and Shang, H., (2011), Geothermal energy recovery from underground mines, Renewable and Sustainable Energy Reviews, 15, 916-924.
Ko, Y. D. and Shang, H. (2011), Time delay neural network modeling for particle size in SAG mills, Powder Technology, 205, 250-262.
Shang, H. and Scott, J.A. (2011), Minimizing leakage from a smelter off-gas system by enhanced control, Journal of Cleaner Production, 19, 70-77.
Shang, H., Scott, J.A., Ross, G.M. and Shepherd, S., (2010), A dynamic temperature model of mine water-fed raceways used for microalgae biofuel production, Environmental Process & Sustainable Energy, 29 (4), 510-516.
Shang, H., Scott, J.A., Ross, G.M. and Shepherd,S. (2010), A dynamic thermal model for heating microalgae incubators using off-gas, Chemical Engineering Science, 65, 4591-4597.
Alenany, A., Shang, H., Soliman, M. and Ziedan I. (2010), Subspace identification with prior steady state information, accepted in the Sixth International Conference on Computer Engineering and Systems (ICCES'2010), Cairo, Egypt, 30 November- 2 December, 2010.
Shang, H., Scott, J.A., Ross, G.M., Shepherd, S., Salt B. and Loken M. (2010), Hosting of Green Energy and Chemical Production on Mining Industry Sites Pre- and Post-Closure. V International Conference on Mine Closure, Nov. 23-26, Chile.
Renaud, L., Scott, A. Shang, H., Shepherd, S., Salt B., Loken M. and Ross, G.M., (2010), Microalgae and the mining industry: a research review, Maintenance Engineering Mine Operators Conference 2010, Sudbury, Ontario.
Araujo, A.C.B., Brito, R.P. and Shang, H. (2009), Mitigation of energy intensity of an industrial off-gas cleaning system using process engineering solution, Journal of Cleaner Production, 17, 1512-1525.
Araujo, A.C.B. and Shang, H. (2009), Enhancing a smelter off-gas system using a plant-wide control design. Industrial & Engineering Chemistry Research, 48 (6), 3004-3013.
Hall, S. T., Scott, J. A., Shang, H. and Shepherd, S. (2009), Microalgae-derived biofuel production from mine waters, Eleventh International Symposium on Environmental Issues and Waste Management in Energy and Mineral Production (SWEMP 2009), November 16-18, 2009, Banff Park Lodge, Banff, Alberta, Canada.
Araujo, A. C. B., Brito, R. P. and Shang, H. (2009), Optimal operation of an industrial smelter furnace off-gas cleaning system. in 10th International Symposium on Process Systems Engineering, PSE'09, Salvador-Bahia-Brazil, August 16-20, 2009.
Araujo, A. C. B., Neto, J. J. N. and Shang, H. (2009), Optimal operation of an industrial PVC dryer, in 10th International Symposium on Process Systems Engineering, PSE'09, Salvador-Bahia-Brazil, August 16-20, 2009.
Scott, J. A., Hall, A., Shang, H. and Hall S. (2009), Possibilities for sustainable energy recovery from a workable mine, 48th Annual Conference of Metallurgists, COM 2009, Sudbury, Aug. 23-26, 2009.
Shang, H., Nelson, P., Salt, B. and Scott J.A. (2009), Integrated modelling of a smelter off-gas cleaning system, 48th Annual Conference of Metallurgists, COM 2009, Sudbury, Aug. 23-26, 2009.
Shang, H., Dillabough, M., Nelson, P. and Salt, B. (2008), Dynamic modelling of an industrial furnace and converter off-gas system, American Journal of Environmental Sciences, 4 (1), 22-30.
Wang, J., Liu, D. and Shang, H. (2008), Hill valley function based niching particle swarm optimization for multimodal functions, 2009 International Conference on Artificial Intelligence and Computational Intelligence, Shanghai, China, Nov. 7- 8.
Shang, H, Mehta, B., Thwaites, P., Ryan, L. and Nelson, P. (2007), Dynamic modeling of an industrial roaster off-gas system in a Nickel smelter, Industrial & Engineering Chemistry Research, 46, 5371-5379.
Shang, H., Forbes, J.F. and Guay, M. (2007), Computationally efficient model predictive control for convection dominated parabolic systems, Journal of Process Control. 17, 379-386.
Shang, H, Thwaites, P., Ryan, L. and Nelson, P. (2007), Comparison of different control methods for an industrial Nickel smelter roaster off-gas system, Proceedings of 12th IFAC Symposium on Automation in Mining, Mineral and Metal Processing, August, Quebec City, Canada.
Wan, F., Shang, H. and Wang, L.X. (2006), Adaptive fuzzy control of a pH process, Proceedings of IEEE International Conference on Fuzzy Systems, Sheraton Vancouver Wall Centre, Vancouver, BC, July 16-21, 2006.
Shang, H. (2006), Improving SAG mill performance using nonlinear model predictive control, Proceedings of MPMSC conference, June, 2006, Sudbury, Ontario, Canada.
Dillabough, M., Shang, H. and McLellan, P. J. (2006), State space approach for boundary control of distributed parameter systems, Proceedings of Advanced Control of Chemical Processes (AdChem), April, Brazil. 2006.
Shang, H., Zhang, Z. and Anderson, W.A. (2005), Non-uniform radiation modelling of a corrugated plate photocatalytic reactor, AIChE Journal, 51 (7), 2024-2033.
Wan F., Shang, H., Wang, L.X. and Sun, Y.X (2005), How to determine the minimum number of fuzzy rules to achieve given accuracy: a computational geometric approach to SISO case, Fuzzy Sets and Systems, 150, 199-209.
Shang, H., Forbes, J.F. and Guay, M. (2005), Feedback control of hyperbolic distributed parameter systems, Chemical Engineering Science, 60(4) 969-980.
Shang, H., Forbes, J.F. and Guay, M. (2004), Model predictive control for quasilinear hyperbolic distributed parameter systems, Industrial & Engineering Chemistry Research, 43(9) 2140-2149.
Wan, F., and Shang, H. (2004), Fuzzy model based adaptive predictive control of nonaffine nonlinear systems: one-step-ahead and multi-step-ahead schemes. Proceedings of 43rd IEEE Conference on Decision and Control, December 14-17, 2004, Atlantis, Paradise Island, Bahamas.
Wan, F., Shang, H. and Wang, L.X. (2004), Control of discrete-time chaotic systems using one-step-ahead adaptive fuzzy controller, Proceedings of IEEE International Conference on Fuzzy Systems (FUZZ-IEEE 2004), Budapest, Hungary, July 26 - 29, 2004.
Shang, H., Forbes, J.F. and Guay, M. (2004), Distributed predictive control of pulp bleaching towers, Proceedings of Control Systems 2004, Quebec City, June, 2004.
Wan, F., Shang, H. and Wang, L. (2004), Control of neutralization processes using a novel adaptive fuzzy controller, Proceedings of American Control Conference 2004, June 30-July 2, Boston, 2004.
Shang, H., Wiskel, J.B., Forbes J.F. and Henein, H. (2003), Exploiting model fidelity to control in metals processing, JOM - J MIN MET MAT S, 55, 3, 41-45, 2003.
Shang, H, Wiskel, J.B., Forbes, J.F. and Henein, H. (2003), New opportunities in optimization and control of metals processing, Proceedings of Material Science & Technology (MS&T) 2003, Chicago, November 2003.
Shang, H., Forbes, J.F. and Guay, M. (2002), Characteristics-based model predictive control for distributed parameter systems, Proceedings of American Control Conference 2002, Anchorage, USA.
Shang, H., Forbes, J.F. and Guay, M. (2000), Output feedback control of first-order PDE systems, Proceedings of Advanced Control of Chemical Processes, Italy, June, 2000.